CCNA 1 Pretest Exam Answer v5 & v5.02 2015 (100%)

  • 21/03/2015 12:44
  • 7.179


1. Convert the decimal number 231 into its binary equivalent. Select the correct answer from the list below.

  • 11110010
  • 11011011
  • 11110110
  • 11100111
  • 11100101
  • 11101110

2. Convert the binary number 10111010 into its hexadecimal equivalent. Select the correct answer from the list below.

  • 85
  • 90
  • BA
  • A1
  • B3
  • 1C

3. The failure rate in a certain brand of network interface card has been determined to be 15%. How many cards could be expected to fail in a company that has 80 of the cards installed?

  • 8
  • 10
  • 12
  • 15

4. A local real estate company can have its 25 computer systems upgraded for $1000. If the company chooses only to upgrade 10 systems, how much will the upgrade cost if the same rate is used?

  • $100
  • $200
  • $400
  • $500
  • $600

5. Considering the average capacity of storage device media, drag the storage media on the left to the capacity list on the right.

CCNA 1 Pretest Exam Answer  v5 & v5.02 2015 (100%)

CCNA Pretest Exam Answer 001 (v5.02, 2015)

 

6. Which two devices provide permanent data storage? (Choose two.)

  • Blu-Ray disc
  • hard drive
  • keyboard
  • monitor
  • RAM

7. If a technician uses an average of 2 cans of compressed air per week for cleaning, how many cans should be ordered for 8 technicians over the next 10 weeks?

  • 16
  • 20
  • 80
  • 160
  • 200

8. What is a function of the BIOS?

  • enables a computer to connect to a network
  • provides temporary data storage for the CPU
  • performs a power-on self test of internal components
  • provides graphic capabilities for games and applications

9. Match the form of network communication with its description. (Not all options are used.)

CCNA 1 Pretest Exam Answer  v5 & v5.02 2015 (100%)

CCNA Pretest Exam Answer 002 (v5.02, 2015)

 

10. Refer to the exhibit. Match the port to the associated letter shown in the exhibit. (Not all options are used.)

CCNA 1 Pretest Exam Answer  v5 & v5.02 2015 (100%)

CCNA Pretest Exam Answer 003 (v5.02, 2015)

 

CCNA 1 Pretest Exam Answer  v5 & v5.02 2015 (100%)

CCNA Pretest Exam Answer 004 (v5.02, 2015)

 

11. Which is a characteristic of the Internet?

  • It is not centrally governed.
  • It uses only physical addresses.
  • It uses private IP addressing.
  • It is localized to specific geographic locations.

12. Match the icon to its likely associated use. (Not all options are used.)

CCNA 1 Pretest Exam Answer  v5 & v5.02 2015 (100%)

CCNA Pretest Exam Answer 005 (v5.02, 2015)

 

13. Which command can be used to test connectivity between two computers that are attached to a network?

  • ipconfig
  • ping
  • winipcfg
  • ifconfig
  • nbtstst -s

14. A person-hour is the amount of work that the average worker can do in one hour. It is anticipated that a company-wide system upgrade will take approximately 60 person-hours to complete. How long will it take five technicians to perform the refresh?

  • 5 hours
  • 8 hours
  • 10 hours
  • 12 hours

15. Match the application with the correct compressed files format. (Not all options are used.)

CCNA 1 Pretest Exam Answer  v5 & v5.02 2015 (100%)

CCNA Pretest Exam Answer 006 (v5.02, 2015)

 

16. Which type of connector does a network interface card use?

  • DIN
  • PS-2
  • RJ-11
  • RJ-45

17. A user is having problems accessing the Internet. The command ping www.cisco.com fails. However, pinging the IP address of cisco.com with the command ping 198.133.219.25 is successful. What is the problem?

  • The web server is down.
  • The default gateway is incorrect.
  • There is a problem with DNS.
  • The address of the ARP cache is incorrect.

18. Which option shows the proper notation for an IPv6 address?

  • 2001,0db8,3c55,0015,abcd,ff13
  • 2001-0db8-3c55-0015-abcd-ff13
  • 2001.0db8.3c55.0015.abcd.ff13
  • 2001:0db8:3c55:0015::abcd:ff13

19. What is the purpose of the routing process?

  • to encapsulate data that is used to communicate across a network
  • to select the paths that are used to direct traffic to destination networks
  • to convert a URL name into an IP address
  • to provide secure Internet file transfer
  • to forward traffic on the basis of MAC addresses

20. Which device should be used for enabling a host to communicate with another host on a different network?

  • switch
  • hub
  • router
  • host

21. A home user is looking for an ISP connection that provides high speed digital transmission over regular phone lines. What ISP connection type should be used?

  • DSL
  • dial-up
  • satellite
  • cell modem
  • cable modem

22. A company is expanding its business to other countries. All branch offices must remain connected to corporate headquarters at all times. Which network technology is required to support this requirement?

  • LAN
  • MAN
  • WAN
  • WLAN

23. Why would a network administrator use the tracert utility?

  • to determine the active TCP connections on a PC
  • to check information about a DNS name in the DNS server
  • to identify where a packet was lost or delayed on a network
  • to display the IP address, default gateway, and DNS server address for a PC

24. Which basic process is used to select the best path for forwarding data?

  • routing
  • switching
  • addressing
  • encapsulation

25. Which wireless security procedure should be used to hide the WLAN ID from wireless clients?

  • Configure WEP only on the access point.
  • Install WAP on the wireless clients.
  • Configure MAC address filtering on the access point.
  • Disable the broadcast of the SSID on the access point.
  • Decrease the antenna spectrum on each wireless client.

26. What is the purpose of having a converged network?

  • to provide high speed connectivity to all end devices
  • to make sure that all types of data packets will be treated equally
  • to achieve fault tolerance and high availability of data network infrastructure devices
  • to reduce the cost of deploying and maintaining the communication infrastructure

27. Refer to the exhibit. Consider the IP address configuration shown from PC1. What is a description of the default gateway address?

CCNA 1 Pretest Exam Answer  v5 & v5.02 2015 (100%)

CCNA Pretest Exam Answer 007 (v5.02, 2015)

  • It is the IP address of the Router1 interface that connects the company to the Internet.
  • It is the IP address of the Router1 interface that connects the PC1 LAN to Router1.
  • It is the IP address of Switch1 that connects PC1 to other devices on the same LAN.
  • It is the IP address of the ISP network device located in the cloud.

28. Which technology provides a solution to IPv4 address depletion by allowing multiple devices to share one public IP address?

  • ARP
  • DNS
  • NAT
  • SMB
  • DHCP
  • HTTP

29. Which subnet would include the address 192.168.1.96 as a usable host address?

  • 192.168.1.64/26
  • 192.168.1.32/27
  • 192.168.1.32/28
  • 192.168.1.64/29

30. A technician uses the ping 127.0.0.1 command. What is the technician testing?

  • the TCP/IP stack on a network host
  • connectivity between two adjacent Cisco devices
  • connectivity between a PC and the default gateway
  • connectivity between two PCs on the same network
  • physical connectivity of a particular PC and the network

31. Which function is provided by TCP?

  • data encapsulation
  • detection of missing packets
  • communication session control
  • path determination for data packets

32. What is the purpose of ICMP messages?

  • to inform routers about network topology changes
  • to ensure the delivery of an IP packet
  • to provide feedback of IP packet transmissions
  • to monitor the process of a domain name to IP address resolution

33. What statement describes the function of the Address Resolution Protocol?

  • ARP is used to discover the IP address of any host on a different network.
  • ARP is used to discover the IP address of any host on the local network.
  • ARP is used to discover the MAC address of any host on a different network.
  • ARP is used to discover the MAC address of any host on the local network.

34. What is the general term that is used to describe a piece of data at any layer of a networking model?

  • frame
  • packet
  • protocol data unit
  • segment

35. Which three IP addresses are private ? (Choose three.)

  • 10.1.1.1
  • 172.32.5.2
  • 192.167.10.10
  • 172.16.4.4
  • 192.168.5.5
  • 224.6.6.6

36. How does a networked server manage requests from multiple clients for different services?

  • The server sends all requests through a default gateway.
  • Each request is assigned source and destination port numbers.
  • The server uses IP addresses to identify different services.
  • Each request is tracked through the physical address of the client.

37. Which protocol translates a website name such as www.cisco.com into a network address?

  • HTTP
  • FTP
  • DHCP
  • DNS

38. What is an advantage of using IPv6 ?

  • more addresses for networks and hosts
  • faster connectivity
  • higher bandwidth
  • more frequencies

39. Refer to the exhibit. Using the network in the exhibit, what would be the default gateway address for host A in the 192.133.219.0 network?

CCNA 1 Pretest Exam Answer  v5 & v5.02 2015 (100%)

CCNA Pretest Exam Answer 008 (v5.02, 2015)

  • 192.135.250.1
  • 192.31.7.1
  • 192.133.219.0
  • 192.133.219.1

40. Refer to the exhibit. Host_A is preparing to send data to Server_B. How will Host_A address the packets and frames that will carry this data? (Choose two.)

CCNA 1 Pretest Exam Answer  v5 & v5.02 2015 (100%)

CCNA Pretest Exam Answer 009 (v5.02, 2015)

  • The packet destination will be addressed with the IP address of the Router_B interface that is attached to Router_A.
  • The frame destination will be addressed with the MAC address of Switch_A.
  • The packet destination will be addressed with the IP address of the Router_A LAN interface.
  • The frame destination will be addressed with the MAC address of the Router_A LAN interface.
  • The packet destination will be addressed with the IP address of Server_B.
  • The frame destination will be addressed with the MAC address of Server_B..



Bình luận

About Us

CCNA v5 Answers, CCNA v5 Blog, CCNA 5 Blog, CCNA Blog

Articles

Our Contacts