CCNA 3 Scaling Networks v6.0 ScaN EIGRP Practice Skills Assessment Answers Option 2 | CCNA5.NET

  • 29/03/2018 16:16
  • 9





CCNA 3 Scaling Networks v6.0 ScaN EIGRP Practice Skills Assessment Answers Option 2

CCNA 3 Scaling Networks v6.0 ScaN EIGRP Practice Skills Assessment Answers Option 2 | CCNA5.NET

DataCenter Router

DataCenter>enable
DataCenter#configure terminal
DataCenter(config)#ip route 0.0.0.0 0.0.0.0 s0/1/0
DataCenter(config)#ipv6 unicast-routing
DataCenter(config)#ipv6 route ::/0 s0/1/0
DataCenter(config)#router eigrp 99
DataCenter(config-router)#network 192.168.100.8 0.0.0.3
DataCenter(config-router)#network 192.168.100.20 0.0.0.3
DataCenter(config-router)#eigrp router-id 1.1.1.1
DataCenter(config-router)#exit
DataCenter(config)#ipv6 router eigrp 99
DataCenter(config-rtr)#eigrp router-id 1.1.1.1
DataCenter(config-rtr)#no shutdown
DataCenter(config-rtr)#exit

DataCenter(config)#int s0/0/0
DataCenter(config-if)#ipv6 eigrp 99

DataCenter(config-if)#int s0/0/1
DataCenter(config-if)#ipv6 eigrp 99
DataCenter(config-if)#exit

DataCenter(config)#int s0/1/0
DataCenter(config-if)#ipv6 eigrp 99
DataCenter(config-if)#exit

DataCenter(config)#int s0/0/0
DataCenter(config-if)#bandwidth 2000
DataCenter(config-if)#exit

DataCenter(config)#int s0/0/1
DataCenter(config-if)#bandwidth 2000
DataCenter(config-if)#exit

DataCenter(config)#router eigrp 99
DataCenter(config-router)#redistribute static
DataCenter(config-router)#exit
DataCenter(config)#ipv6 router eigrp 99
DataCenter(config-rtr)#redistribute static
DataCenter(config-rtr)#

============================

Clinic_10 Router:

Clinic_10>enable
Clinic_10#configure terminal
Clinic_10(config)#ip route 0.0.0.0 0.0.0.0 s0/0/0
Clinic_10(config)#int g0/0
Clinic_10(config-if)#standby 1 ip 10.1.0.1
Clinic_10(config-if)#standby version 2

============================

Hospital_1 Router:

Hospital_1>enable
Hospital_1#configure terminal
Hospital_1(config)#router eigrp 99
Hospital_1(config-router)#network 10.1.0.0 0.0.0.255
Hospital_1(config-router)#network 192.168.100.8 0.0.0.3
Hospital_1(config-router)#network 192.168.100.32 0.0.0.3
Hospital_1(config-router)#eigrp router-id 2.2.2.2
Hospital_1(config-router)#exit
Hospital_1(config)#ipv6 unicast-routing
Hospital_1(config)#ipv6 router eigrp 99
Hospital_1(config-rtr)#eigrp router-id 2.2.2.2
Hospital_1(config-rtr)#no shutdown
Hospital_1(config-rtr)#exit
Hospital_1(config)#int s0/0/1
Hospital_1(config-if)#ipv6 eigrp 99
Hospital_1(config-if)#int s0/0/0
Hospital_1(config-if)#ipv6 eigrp 99
Hospital_1(config-if)#int g0/0
Hospital_1(config-if)#ipv6 eigrp 99
Hospital_1(config-if)#exit

Hospital_1(config)#int s0/0/0
Hospital_1(config-if)#bandwidth 2000
Hospital_1(config-if)#exit
Hospital_1(config)#router eigrp 99
Hospital_1(config-router)#passive-interface g0/0
Hospital_1(config-router)#exit

Hospital_1(config)#int g0/0
Hospital_1(config-if)#standby 1 ip 10.1.0.1
Hospital_1(config-if)#standby 1 preempt
Hospital_1(config-if)#standby 1 priority 150
Hospital_1(config-if)#standby version 2

============================

Hospital_2 Router:

Hospital_2>enable
Hospital_2#configure terminal
Hospital_2(config)#router eigrp 99
Hospital_2(config-router)#network 10.10.0.0 0.0.0.255
Hospital_2(config-router)#network 10.15.0.0 0.0.0.255
Hospital_2(config-router)#network 10.20.0.0 0.0.0.255
Hospital_2(config-router)#network 192.168.100.20 0.0.0.3
Hospital_2(config-router)#network 192.168.100.32 0.0.0.3
Hospital_2(config-router)#eigrp router-id 3.3.3.3
Hospital_2(config-router)#exit

Hospital_2(config)#ipv6 unicast-routing
Hospital_2(config)#ipv6 router eigrp 99
Hospital_2(config-rtr)#eigrp router-id 3.3.3.3
Hospital_2(config-rtr)#no shutdown
Hospital_2(config-rtr)#exit
Hospital_2(config)#int g0/0.10
Hospital_2(config-subif)#ipv6 eigrp 99
Hospital_2(config-subif)#int g0/0.15
Hospital_2(config-subif)#ipv6 eigrp 99
Hospital_2(config-subif)#int g0/0.20
Hospital_2(config-subif)#ipv6 eigrp 99
Hospital_2(config-subif)#exit

Hospital_2(configpv6 eigrp)#int s0/0/0
Hospital_2(config-if)#ipv6 eigrp 99
Hospital_2(config-if)#int s0/0/1
Hospital_2(config-if)#ipv6 eigrp 99
Hospital_2(config-if)#int s0/1/0
Hospital_2(config-if)#ipv6 eigrp 99
Hospital_2(config-if)#exit
Hospital_2(config)#int s0/0/1
Hospital_2(config-if)#bandwidth 2000
Hospital_2(config-if)#exit

Hospital_2(config)#router eigrp 99
Hospital_2(config-router)#passive-interface g0/0.10
Hospital_2(config-router)#passive-interface g0/0.15
Hospital_2(config-router)#passive-interface g0/0.20
Hospital_2(config-router)#exit
Hospital_2(config)#int g0/0
Hospital_2(config-if)#no sh
Hospital_2(config-if)#

============================

Net_1 Switch:

Change VTP domain and VTP Password to match your exam

Net_1>enable
Net_1#configure terminal
Net_1(config)#int range f0/3-4
Net_1(config-if-range)#channel-group 1 mode active
Net_1(config-if-range)#int range f0/5-6
Net_1(config-if-range)#channel-group 2 mode active
Net_1(config-if-range)#exit
Net_1(config)#int g0/1
Net_1(config-if)#no shutdown

Net_1(config-if)#int g0/1
Net_1(config-if)#switchport mode trunk
Net_1(config-if)#switchport trunk native vlan 99
Net_1(config-if)#int g0/1
Net_1(config-if)#switchport nonegotiate

Net_1(config-if)#int range f0/3-4
Net_1(config-if-range)#switchport mode trunk
Net_1(config-if-range)#switchport trunk native vlan 99
Net_1(config-if-range)#int port-channel 1
Net_1(config-if)#switchport mode trunk
Net_1(config-if)#switchport trunk native vlan 99
Net_1(config-if)#switchport nonegotiate

Net_1(config-if)#int range f0/5-6
Net_1(config-if-range)#switchport mode trunk
Net_1(config-if-range)#switchport trunk native vlan 99
Net_1(config-if-range)#int port-channel 2
Net_1(config-if)#switchport mode trunk
Net_1(config-if)#switchport trunk native vlan 99
Net_1(config-if)#switchport nonegotiate
Net_1(config-if)#exit

Net_1(config)#vtp mode server
Net_1(config)#vtp domain TownEd
Net_1(config)#vtp password TWE_123!
Net_1(config)#vtp version 2

Net_1(config)#spanning-tree mode rapid-pvst
Net_1(config)#spanning-tree vlan 10,15,20 priority 24576

============================

FL_1 Switch:

Change VTP domain and VTP Password to match your exam

FL_1>enable
FL_1#configure terminal
FL_1(config)#int range f0/3-4
FL_1(config-if-range)#channel-group 1 mode active
FL_1(config-if-range)#int range f0/1-2
FL_1(config-if-range)#channel-group 3 mode active
FL_1(config-if-range)#exit

FL_1(config)#int range f0/3-4
FL_1(config-if-range)#switchport mode trunk
FL_1(config-if-range)#switchport trunk native vlan 99
FL_1(config-if-range)#int port-channel 1
FL_1(config-if)#switchport mode trunk
FL_1(config-if)#switchport trunk native vlan 99
FL_1(config-if)#switchport nonegotiate
FL_1(config-if)#int range f0/1-2
FL_1(config-if-range)#switchport mode trunk
FL_1(config-if-range)#switchport trunk native vlan 99
FL_1(config-if-range)#int port-channel 3
FL_1(config-if)#switchport mode trunk
FL_1(config-if)#switchport trunk native vlan 99
FL_1(config-if)#switchport nonegotiate
FL_1(config-if)#exit

FL_1(config)#vtp mode client
FL_1(config)#vtp domain TownEd
FL_1(config)#vtp password TWE_123!
FL_1(config)#vtp version 2
FL_1(config)#spanning-tree mode rapid-pvst
FL_1(config)#int range f0/10-24
FL_1(config-if-range)#spanning-tree bpduguard enable
FL_1(config-if-range)#spanning-tree portfast

============================

Fl_2 Switch:

Change VTP domain and VTP Password to match your exam

Fl_2>
Fl_2>enable
Fl_2#configure terminal
Fl_2(config)#int range f0/5-6
Fl_2(config-if-range)#channel-group 2 mode active

Fl_2(config-if-range)#int range f0/1-2
Fl_2(config-if-range)#channel-group 3 mode active
Fl_2(config-if-range)#exit
Fl_2(config-if-range)#
Fl_2(config)#int range f0/5-6
Fl_2(config-if-range)#switchport mode trunk
Fl_2(config-if-range)#switchport trunk native vlan 99

Fl_2(config-if-range)#int port-channel 2
Fl_2(config-if)#switchport mode trunk
Fl_2(config-if)#switchport trunk native vlan 99
Fl_2(config-if)#switchport nonegotiate
Fl_2(config-if)#int range f0/1-2
Fl_2(config-if-range)#switchport mode trunk
Fl_2(config-if-range)#switchport trunk native vlan 99

Fl_2(config-if-range)#int port-channel 3
Fl_2(config-if)#switchport mode trunk
Fl_2(config-if)#switchport trunk native vlan 99
Fl_2(config-if)#switchport nonegotiate
Fl_2(config-if)#exit

Fl_2(config)#vtp mode client
Fl_2(config)#vtp domain TownEd
Fl_2(config)#vtp password TWE_123!

Fl_2(config)#spanning-tree mode rapid-pvst
Fl_2(config)#spanning-tree vlan 10,15,20 priority 28672

============================

On host Clnc_2, go to the Desktop tab and open the Command Prompt.

– Enter telnet 2001:DB8:E::1
– Authenticate your Telnet session with the password cisco.
– Move to privileged EXEC mode using the password admin.

Remote>enable
Remote#configure terminal
Remote(config)#interface g0/0
Remote(config-if)#no shutdown

============================

Host Clnc_1:

IP Address: 10.1.0.11

Subnet Mask: 255.255.255.0

Gateway IP address: 10.1.0.1

=========================

Host H1-1:

IP Address: 10.1.0.14

Subnet Mask: 255.255.255.0

Gateway IP address: 10.1.0.1


قالب وردپرس


Bình luận

About Us

CCNA v5 Answers, CCNA v5 Blog, CCNA 5 Blog, CCNA Blog

Articles

Our Contacts