CCNA 4 v6.0

CCNA 4 v6.0 Final Exam Answers Option C 100% | CCNA5.NET

1. What is a primary difference between a company LAN and the WAN services that it uses? The company must subscribe to an external WAN service provider.* The company has direct control over its WAN links but not over its LAN. Each LAN has a specified demarcation point to clearly separate access layer and distribution layer equipment. The LAN may use a number of different network access layer standards whereas the WAN will use only one standard. 2. Which circumstance would result in an enterprise deciding to implement a corporate WAN? when its employees become distributed across many branch locations* when the network will span multiple buildings when the number of employees exceeds the capacity of the LAN when the enterprise decides to secure its corporate LAN 3.To which two layers of the OSI model do WAN technologies provide services? (Choose two.) network layer session layer physical layer* transport layer data link layer* presentation layer 4. Which two

CCNA 4 v6.0 Chapter 3 SIC PPP, Routing, and Remote Access VPN – PT Skills Assessment Option 1

Chapter 3 SIC: PPP, Routing, and Remote Access VPN Option 1 A few things to keep in mind while completing this activity: Do not use the browser Backbutton or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessmentbutton to submit your work. Addressing Table Note: All device console passwords are cisco. All device enable passwords are class. Step 1 Configure HDLC on router Secure. Configure the WAN link from router Secure to ISP_1 using HDLC encapsulation. Step 2 Configure PPP to connect HQ to ISP_1. Configure the WAN link from router HQ to ISP_1 using PPP encapsulation and CHAP authentication. Create a user ISP_1 with the password of cisco123. Step 3 Configure eBGP routing. a. Configure router HQ with eBGP routing. Configure HQ to peer with ISP_1. Add only HQ 10.1.1.0/24 internal network to BGP. b. Configure router Branch with eBGP routing. Configure Branch to peer with ISP

CCNA 4 v6.0 Chapter 3 SIC PPP, Routing, and Remote Access VPN – PT Skills Assessment Option 2 | CCNA5.NET

Note: All device console passwords are cisco. All device enable passwords are class. Step 1 Configure HDLC on router Storage. Configure the WAN link from router Storage to ISP_1 using HDLC encapsulation. Step 2 Configure PPP to connect Corp to ISP_1. Configure the WAN link from router Corp to ISP_1 using PPP encapsulation and CHAP authentication. Create a user ISP_1 with the password of cisco123. Step 3 Configure eBGP routing. a. Configure router Corp with eBGP routing. Configure Corp to peer with ISP_1. Add only Corp 10.1.1.0/24 internal network to BGP. b. Configure router Remote with eBGP routing. Configure Remote to peer with ISP_1. Add the Remote internal network to BGP Step 4 Configure GRE Tunneling. a. Configure router Corp with a tunnel interface to send IP traffic over GRE to Remote. Configure Tunnel 1 with appropriate addressing information. Configure the tunnel source with the local exit interface. Configure the tunnel destination with the appropriate endpoint IP address

CCNA 4 v6.0 Chapter 3 SIC PPP, Routing, and Remote Access VPN – PT Skills Assessment Option 3

Chapter 3 SIC: PPP, Routing, and Remote Access VPN Option 3 A few things to keep in mind while completing this activity: Do not use the browser Backbutton or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessmentbutton to submit your work. Addressing Table Note: All device console passwords are cisco. All device enable passwords are class. Step 1 Configure HDLC on router OffSite. Configure the WAN link from router OffSite to ISP_1 using HDLC encapsulation. Step 2 Configure PPP to connect Main to ISP_1. Configure the WAN link from router Main to ISP_1 using PPP encapsulation and CHAP authentication. Create a user ISP_1 with the password of cisco123. Step 3 Configure eBGP routing. a. Configure router Main with eBGP routing. Configure Main to peer with ISP_1. Add only Main 10.1.1.0/24 internal network to BGP. b. Configure router Backup with eBGP routing. Configure Backup to

CCNA 4 v6.0 Chapter 5 SIC Access Control List and SNMP Configuration PT Skills Assessment Option 1 | CCNA5.NET

Step 1: Configure SNMP Community Strings on the HQ router. a. Configure a Read Only SNMP community string hq-monitor. b. Configure a Read/Write SNMP community string hq-inside. Step 2: Configure an ACL for NAT on the HQ router. a. Configure standard access list numbered 1 to allow NAT for hosts in network 192.168.10.0 /24. Step 3: Configure a standard ACL to restrict remote access to the HQ router. a. Configure a standard ACL numbered 12 to restrict remote access to HQ. • Allow only the HQ-Admin-PC to access the HQ router remotely via VTY. • All other remote connections should fail. Step 4: Configure two extended ACLs to restrict access to SNMP operation on the HQ router. a. Configure an extended ACL named SNMPACCESS. • The SNMP operation runs UDP on port 161. • Allow only the HQ-Admin-PC to access the HQ router for the SNMP connection. • SNMP connections from other hosts on the HQ LAN should fail. • Allow all other IP traffic. • Apply this ACL on the HQ router, G0/0

CCNA 4 v6.0 Chapter 5 SIC Access Control List and SNMP Configuration PT Skills Assessment Option 2 | CCNA5.NET

A few things to keep in mind while completing this activity: Do not use the browser Backbutton or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessmentbutton to submit your work. Introduction In this practice Packet Tracer Skills Based Assessment, you will: Configure SNMP community strings. Configure standard and extended IPv4 ACLs to filter network traffic. Configure an IPv6 ACLs to filter network traffic. Addressing Table Step 1: Configure SNMP Community Strings on the Central router. a. Configure a Read Only SNMP community string hq-monitor. b. Configure a Read/Write SNMP community string hq-inside. Step 2: Configure an ACL for NAT on the Central router. a. Configure standard access list numbered 1 to allow NAT for hosts in network 192.168.10.0 /24. Access-list 1 permit 192.168.10.0 0.0.0.255 Step 3: Configure a standard ACL to restrict remote access to the

CCNA 4 v6.0 Chapter 5 SIC Access Control List and SNMP Configuration PT Skills Assessment Option 3 | CCNA5.NET

  • 29/03/2018 16:10
  • /
  • 92

A few things to keep in mind while completing this activity: Do not use the browser Back button or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessment button to submit your work. Introduction In this practice Packet Tracer Skills Based Assessment, you will: Configure SNMP community strings. Configure standard and extended IPv4 ACLs to filter network traffic. Configure an IPv6 ACLs to filter network traffic. Addressing Table Step 1: Configure SNMP Community Strings on the Main router. a. Configure a Read Only SNMP community string hq-monitor. b. Configure a Read/Write SNMP community string hq-inside. Step 2: Configure an ACL for NAT on the Main router. a. Configure standard access list numbered 1 to allow NAT for hosts in network 192.168.10.0 /24. Step 3: Configure a standard ACL to restrict remote access to the Main router. a. Configure a standard ACL numbered

CCNA 4 v6.0 Connecting Networks – CN Practice Skills Assessment – PT Option A | CCNA5.NET

Connecting Networks – Skill-Based Assessment – Packet Tracer Option A A few things to keep in mind while completing this activity: Do not use the browser Back button or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessment button to submit your work. Objectives In this Packet Tracer Skills Based Assessment, you will do as follows: Configure PPP encapsulation and CHAP authentication for serial links. Configure a GRE tunnel. Configure OSPF. Configure BGP. Configure standard and extended IPv4 ACLs. Configure IPv6 ACLs. For the sake of time, many repetitive, but important, configuration tasks have been omitted from this assessment. Many of these tasks, especially those related to security, are essential elements of a network configuration. The intent of this activity is not to diminish the importance of full device configurations. The IP addresses for all the devices

CCNA 4 v6.0 Connecting Networks – CN Practice Skills Assessment – PT Option B | CCNA5.NET

Connecting Networks – Skill-Based Assessment – Packet Tracer Option B A few things to keep in mind while completing this activity: Do not use the browser Back button or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessment button to submit your work. Objectives In this Packet Tracer Skills Based Assessment, you will do as follows: Configure PPP encapsulation and CHAP authentication for serial links. Configure a GRE tunnel. Configure OSPF. Configure BGP. Configure standard and extended IPv4 ACLs. Configure IPv6 ACLs. For the sake of time, many repetitive, but important, configuration tasks have been omitted from this assessment. Many of these tasks, especially those related to security, are essential elements of a network configuration. The intent of this activity is not to diminish the importance of full device configurations. The IP addresses for all the devices have

CCNA 4 v6.0 Connecting Networks – CN Practice Skills Assessment – PT Option C | CCNA5.NET

Connecting Networks – Skill-Based Assessment – Packet Tracer Option C A few things to keep in mind while completing this activity: Do not use the browser Backbutton or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessmentbutton to submit your work. Objectives In this Packet Tracer Skills Based Assessment, you will do as follows: Configure PPP encapsulation and CHAP authentication for serial links. Configure a GRE tunnel. Configure OSPF. Configure BGP. Configure standard and extended IPv4 ACLs. Configure IPv6 ACLs. For the sake of time, many repetitive, but important, configuration tasks have been omitted from this assessment. Many of these tasks, especially those related to security, are essential elements of a network configuration. The intent of this activity is not to diminish the importance of full device configurations. The IP addresses for all the devices have

CCNA 4 v6.0 Connecting Networks – CN Practice Skills Assessment – PT Option A | CCNA5.NET

Connecting Networks – Skill-Based Assessment – Packet Tracer Option A A few things to keep in mind while completing this activity: Do not use the browser Back button or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessment button to submit your work. Objectives In this Packet Tracer Skills Based Assessment, you will do as follows: Configure PPP encapsulation and CHAP authentication for serial links. Configure a GRE tunnel. Configure OSPF. Configure BGP. Configure standard and extended IPv4 ACLs. Configure IPv6 ACLs. For the sake of time, many repetitive, but important, configuration tasks have been omitted from this assessment. Many of these tasks, especially those related to security, are essential elements of a network configuration. The intent of this activity is not to diminish the importance of full device configurations. The IP addresses for all the devices

CCNA 4 v6.0 Connecting Networks – CN Practice Skills Assessment – PT Option B | CCNA5.NET

Connecting Networks – Skill-Based Assessment – Packet Tracer Option B A few things to keep in mind while completing this activity: Do not use the browser Back button or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessment button to submit your work. Objectives In this Packet Tracer Skills Based Assessment, you will do as follows: Configure PPP encapsulation and CHAP authentication for serial links. Configure a GRE tunnel. Configure OSPF. Configure BGP. Configure standard and extended IPv4 ACLs. Configure IPv6 ACLs. For the sake of time, many repetitive, but important, configuration tasks have been omitted from this assessment. Many of these tasks, especially those related to security, are essential elements of a network configuration. The intent of this activity is not to diminish the importance of full device configurations. The IP addresses for all the devices have

CCNA 4 v6.0 Connecting Networks – CN Practice Skills Assessment – PT Option C | CCNA5.NET

Connecting Networks – Skill-Based Assessment – Packet Tracer Option C A few things to keep in mind while completing this activity: Do not use the browser Backbutton or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessmentbutton to submit your work. Objectives In this Packet Tracer Skills Based Assessment, you will do as follows: Configure PPP encapsulation and CHAP authentication for serial links. Configure a GRE tunnel. Configure OSPF. Configure BGP. Configure standard and extended IPv4 ACLs. Configure IPv6 ACLs. For the sake of time, many repetitive, but important, configuration tasks have been omitted from this assessment. Many of these tasks, especially those related to security, are essential elements of a network configuration. The intent of this activity is not to diminish the importance of full device configurations. The IP addresses for all the devices have

CCNA 4 v6.0 Chapter 5 SIC Access Control List and SNMP Configuration PT Skills Assessment Option 1 | CCNA5.NET

Step 1: Configure SNMP Community Strings on the HQ router. a. Configure a Read Only SNMP community string hq-monitor. b. Configure a Read/Write SNMP community string hq-inside. Step 2: Configure an ACL for NAT on the HQ router. a. Configure standard access list numbered 1 to allow NAT for hosts in network 192.168.10.0 /24. Step 3: Configure a standard ACL to restrict remote access to the HQ router. a. Configure a standard ACL numbered 12 to restrict remote access to HQ. • Allow only the HQ-Admin-PC to access the HQ router remotely via VTY. • All other remote connections should fail. Step 4: Configure two extended ACLs to restrict access to SNMP operation on the HQ router. a. Configure an extended ACL named SNMPACCESS. • The SNMP operation runs UDP on port 161. • Allow only the HQ-Admin-PC to access the HQ router for the SNMP connection. • SNMP connections from other hosts on the HQ LAN should fail. • Allow all other IP traffic. • Apply this ACL on the HQ router, G0/0

CCNA 4 v6.0 Chapter 5 SIC Access Control List and SNMP Configuration PT Skills Assessment Option 2 | CCNA5.NET

A few things to keep in mind while completing this activity: Do not use the browser Backbutton or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessmentbutton to submit your work. Introduction In this practice Packet Tracer Skills Based Assessment, you will: Configure SNMP community strings. Configure standard and extended IPv4 ACLs to filter network traffic. Configure an IPv6 ACLs to filter network traffic. Addressing Table Step 1: Configure SNMP Community Strings on the Central router. a. Configure a Read Only SNMP community string hq-monitor. b. Configure a Read/Write SNMP community string hq-inside. Step 2: Configure an ACL for NAT on the Central router. a. Configure standard access list numbered 1 to allow NAT for hosts in network 192.168.10.0 /24. Access-list 1 permit 192.168.10.0 0.0.0.255 Step 3: Configure a standard ACL to restrict remote access to the

CCNA 4 v6.0 Chapter 5 SIC Access Control List and SNMP Configuration PT Skills Assessment Option 3 | CCNA5.NET

A few things to keep in mind while completing this activity: Do not use the browser Back button or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessment button to submit your work. Introduction In this practice Packet Tracer Skills Based Assessment, you will: Configure SNMP community strings. Configure standard and extended IPv4 ACLs to filter network traffic. Configure an IPv6 ACLs to filter network traffic. Addressing Table Step 1: Configure SNMP Community Strings on the Main router. a. Configure a Read Only SNMP community string hq-monitor. b. Configure a Read/Write SNMP community string hq-inside. Step 2: Configure an ACL for NAT on the Main router. a. Configure standard access list numbered 1 to allow NAT for hosts in network 192.168.10.0 /24. Step 3: Configure a standard ACL to restrict remote access to the Main router. a. Configure a standard ACL numbered

CCNA 4 v6.0 Chapter 3 SIC PPP, Routing, and Remote Access VPN – PT Skills Assessment Option 1

Chapter 3 SIC: PPP, Routing, and Remote Access VPN Option 1 A few things to keep in mind while completing this activity: Do not use the browser Backbutton or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessmentbutton to submit your work. Addressing Table Note: All device console passwords are cisco. All device enable passwords are class. Step 1 Configure HDLC on router Secure. Configure the WAN link from router Secure to ISP_1 using HDLC encapsulation. Step 2 Configure PPP to connect HQ to ISP_1. Configure the WAN link from router HQ to ISP_1 using PPP encapsulation and CHAP authentication. Create a user ISP_1 with the password of cisco123. Step 3 Configure eBGP routing. a. Configure router HQ with eBGP routing. Configure HQ to peer with ISP_1. Add only HQ 10.1.1.0/24 internal network to BGP. b. Configure router Branch with eBGP routing. Configure Branch to peer with ISP

CCNA 4 v6.0 Chapter 3 SIC PPP, Routing, and Remote Access VPN – PT Skills Assessment Option 3

Chapter 3 SIC: PPP, Routing, and Remote Access VPN Option 3 A few things to keep in mind while completing this activity: Do not use the browser Backbutton or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessmentbutton to submit your work. Addressing Table Note: All device console passwords are cisco. All device enable passwords are class. Step 1 Configure HDLC on router OffSite. Configure the WAN link from router OffSite to ISP_1 using HDLC encapsulation. Step 2 Configure PPP to connect Main to ISP_1. Configure the WAN link from router Main to ISP_1 using PPP encapsulation and CHAP authentication. Create a user ISP_1 with the password of cisco123. Step 3 Configure eBGP routing. a. Configure router Main with eBGP routing. Configure Main to peer with ISP_1. Add only Main 10.1.1.0/24 internal network to BGP. b. Configure router Backup with eBGP routing. Configure Backup to

CCNA 4 v6.0 Chapter 3 SIC PPP, Routing, and Remote Access VPN – PT Skills Assessment Option 2 | CCNA5.NET

Note: All device console passwords are cisco. All device enable passwords are class. Step 1 Configure HDLC on router Storage. Configure the WAN link from router Storage to ISP_1 using HDLC encapsulation. Step 2 Configure PPP to connect Corp to ISP_1. Configure the WAN link from router Corp to ISP_1 using PPP encapsulation and CHAP authentication. Create a user ISP_1 with the password of cisco123. Step 3 Configure eBGP routing. a. Configure router Corp with eBGP routing. Configure Corp to peer with ISP_1. Add only Corp 10.1.1.0/24 internal network to BGP. b. Configure router Remote with eBGP routing. Configure Remote to peer with ISP_1. Add the Remote internal network to BGP Step 4 Configure GRE Tunneling. a. Configure router Corp with a tunnel interface to send IP traffic over GRE to Remote. Configure Tunnel 1 with appropriate addressing information. Configure the tunnel source with the local exit interface. Configure the tunnel destination with the appropriate endpoint IP address

CCNA 4 v6.0 Chapter 3 Exam Answers 100%

CCNA 4 Connecting Networks v6.0 Chapter 3 Exam Answers 100% 1. Which broadband wireless technology is based on the 802.11 standard? municipal Wi-Fi* WiMAX CDMA UMTS 2. What is the approximate distance limitation for providing a satisfactory ADSL service from the central office to a customer? 3.39 miles or 5.46 kilometers* 2.11 miles or 3.39 kilometers 6.21 miles or 10 kilometers 11.18 miles or 18 kilometers 3. What is a component of an ADSL connection that is located at the customer site? CO CPE* SOHO DSLAM 4. What is the function of the DSLAM in a broadband DSL network? multiplexes individual customer DSL connections into a single upstream link* communicates directly with customer cable modems to provide Internet services to customers communicates directly with customer cable modems to provide Internet services to customers separates POTS traffic from ADSL traffic 5. Which broadband technology would be best for a small office that requires fast upstream connections? DSL fiber-to-the


About Us

CCNA v5 Answers, CCNA v5 Blog, CCNA 5 Blog, CCNA Blog

Articles

Our Contacts