CCNA 2 V5.02

CCNA 2 Chapter 1 Exam Answer v5 & v5.02 2015 (100%)

CCNA 2 Chapter 1 What is a basic function of the Cisco Borderless Architecture access layer? aggregates Layer 2 broadcast domains aggregates Layer 3 routing boundaries provides access to the user provides high availability What is a basic function of the Cisco Borderless Architecture distribution layer? acting as a backbone aggregating all the campus blocks..Read More..

CCNA 2 RSE Practice Skills Assessment – PT 2015 (100%)

  • 05/07/2018 12:50
  • /
  • 76

CCNA 2 RSE Practice Skills Assessment – PT 2015 (100%) CCNA 2 RSE Practice Skills Assessment – PT, there are three types of this lab. Please find one type of you topology and click to watch video practice. These video will guide you step by step how to configure to get full score 100%.  ..Read More..

CCNA2 NB_ITN Practice Skills Assessment – PT

CCNA2 NB_ITN Practice Skills Assessment – PT CCNA2 NB_ITN Practice Skills Assessment – PT and CCNA 1 PT Practice Skills Exam are the same lab. So do not think this fake lab. Please find which one is your topology that you are taking.   CCNA2 NB_ITN Practice Skills Assessment – PT Type A CCNA2 NB_ITN Practice Skills..Read More..

CCNA 2 Final Exam Answer v5 & v5.02 2015 (100%)

  • 05/07/2018 12:50
  • /
  • 74

CCNA 2 Final Exam Refer to the exhibit. A network administrator is configuring a router as a DHCPv6 server. The administrator issues a show ipv6 dhcp pool command to verify the configuration. Which statement explains the reason that the number of active clients is 0? The default gateway address is not provided in the pool...Read More..

CCNA 2 Practice Final Exam Answer v5.02 2015 (100%)

  • 05/07/2018 12:50
  • /
  • 62

CCNA 2 Practice Final Exam A client is using SLAAC to obtain an IPv6 address for its interface. After an address has been generated and applied to the interface, what must the client do before it can begin to use this IPv6 address? It must send a DHCPv6 INFORMATION-REQUEST message to request the address of..Read More..

CCNA 2 Chapter 11 Exam Answer v5 & v5.02 2015 (100%)

  • 05/07/2018 12:49
  • /
  • 68

CCNA 2 Chapter 11 Typically, which network device would be used to perform NAT for a corporate environment? DHCP server host device router server switch What is the group of public IPv4 addresses used on a NAT-enabled router known as? outside local addresses inside local addresses inside global addresses outside global addresses When NAT is..Read More..

CCNA 2 Chapter 10 Exam Answer v5 & v5.02 2015 (100%)

  • 05/07/2018 12:49
  • /
  • 69

CCNA 2 Chapter 10 Which DHCPv4 message will a client send to accept an IPv4 address that is offered by a DHCP server? unicast DHCPACK broadcast DHCPACK unicast DHCPREQUEST broadcast DHCPREQUEST A company uses DHCP servers to dynamically assign IPv4 addresses to employee workstations. The address lease duration is set as 5 days. An employee..Read More..

CCNA 2 Chapter 9 Exam Answer v5 & v5.02 2015 (100%)

  • 05/07/2018 12:49
  • /
  • 91

CCNA 2 Chapter 9 What two functions describe uses of an access control list? (Choose two.) ACLs assist the router in determining the best path to a destination. Standard ACLs can restrict access to specific applications and ports. ACLs provide a basic level of security for network access. ACLs can permit or deny traffic based..Read More..

CCNA 2 Chapter 8 Exam Answer v5 & v5.02 2015 (100%)

CCNA 2 Chapter 8 Which OSPF component is identical in all routers in an OSPF area after convergence? adjacency database link-state database routing table SPF tree Which three statements describe features of the OSPF topology table? (Choose three. It is a link-state database that represents the network topology. Its contents are the result of running..Read More..

CCNA 2 Chapter 7 Exam Answer v5 & v5.02 2015 (100%)

  • 05/07/2018 12:49
  • /
  • 95

CCNA 2 Chapter 7 What is the purpose of the passive-interface command? allows a routing protocol to forward updates out an interface that is missing its IP address allows a router to send routing updates on an interface but not receive updates via that innterface allows an interface to remain up without receiving keepalives allows..Read More..

CCNA2 Chapter 6 Practice Skills Assessment – PT

  • 05/07/2018 12:49
  • /
  • 71

CCNA2 Chapter 6 Practice Skills Assessment – PT Objectives Design an IP addressing scheme to provide connectivity to end users in a small to medium-sized business network Configure static routes to enable connectivity in a small to medium-sized business network. Configure summary and floating static routes.   CCNA2 Chapter 6 Practice Skills Assessment – PT..Read More..

CCNA 2 Chapter 6 Exam Answer v5 & v5.02 2015 (100%)

  • 05/07/2018 12:49
  • /
  • 68

CCNA 2 Chapter 6 What are two advantages of static routing over dynamic routing? (Choose two.) Static routing is more secure because it does not advertise over the network. Static routing scales well with expanding networks. Static routing requires very little knowledge of the network for correct implementation. Static routing uses fewer router resources than..Read More..

CCNA 2 Chapter 5 Exam Answer v5 & v5.02 2015 (100%)

CCNA 2 Chapter 5 1. Refer to the exhibit. The switch does the routing for the hosts that connect to VLAN 5. If the PC accesses a web server from the Internet, at what point will a VLAN number be added to the frame? point A point B point C point D point E No..Read More..

CCNA 2 Chapter 4 Exam Answer v5 & v5.02 2015 (100%)

  • 05/07/2018 12:48
  • /
  • 73

CCNA 2 Chapter 4 1. What are two functions of a router? (Choose two.) It connects multiple IP networks. It controls the flow of data via the use of Layer 2 addresses. It determines the best path to send packets. It manages the VLAN database. It increases the size of the broadcast domain. 2. In..Read More..

CCNA 2 Chapter 3 Exam Answer v5 & v5.02 2015 (100%)

  • 05/07/2018 12:48
  • /
  • 79

CCNA 2 Chapter 3 1. Which two statements are true about VLAN implementation? (Choose two.) The size of the collision domain is reduced. The number of required switches in a network decreases. VLANs logically group hosts, regardless of physical location. The network load increases significantly because of added trunking information. Devices in one VLAN do..Read More..

CCNA2 Chapter 2 Practice Skills Assessment PT

CCNA2 Chapter 2 Practice Skills Assessment PT CCNA2 Chapter 2 Practice Skills Assessment PT is separated into 3 type. This page have collection of those type with video configuration type. Before take exam, you should make sure which one is your topology you are taking. Every type will be different with host name and some..Read More..

CCNA 2 Chapter 2 Exam Answer v5 & v5.02 2015 (100%)

  • 05/07/2018 12:48
  • /
  • 81

CCNA 2 Chapter 2 1. Which interface is the default location that would contain the IP address used to manage a 24-port Ethernet switch? VLAN 1 Fa0/0 Fa0/1 interface connected to the default gateway VLAN 99 2. In which type of attack does a malicious node request all available IP addresses in the address pool..Read More..

CCNA 2 Pretest Exam Answer v5 & v5.02 2015 (100%)

  • 05/07/2018 12:48
  • /
  • 64

CCNA 2 Pretest Exam 1. Which two components are configured via software in order for a PC to participate in a network environment? (Choose two.) MAC address IP address kernel shell subnet mask 2. What is the correct order for PDU encapsulation?   3. To revert to a previous configuration, an administrator issues the command..Read More..

CCNA 2 Chapter 2 Exam Answer v5 & v5.02 2015 (100%)

1. Which interface is the default location that would contain the IP address used to manage a 24-port Ethernet switch? VLAN 1 Fa0/0 Fa0/1 interface connected to the default gateway VLAN 99 2. In which type of attack does a malicious node request all available IP addresses in the address pool of a DHCP server in order to prevent legitimate hosts from obtaining network access? CAM table overflow MAC address flooding DHCP starvation DHCP spoofing 3. What impact does the use of the mdix auto configuration command have on an Ethernet interface on a switch? automatically detects duplex settings automatically detects interface speed automatically detects copper cable type automatically assigns the first detected MAC address to an interface 4. Which type of cable does a network administrator need to connect a PC to a switch to recover it after the Cisco IOS software fails to load? a coaxial cable a console cable a crossover cable a straight-through cable 5. While troubleshooting a

CCNA 2 Chapter 6 Exam Answer v5 & v5.02 2015 (100%)

What are two advantages of static routing over dynamic routing? (Choose two.) Static routing is more secure because it does not advertise over the network. Static routing scales well with expanding networks. Static routing requires very little knowledge of the network for correct implementation. Static routing uses fewer router resources than dynamic routing. Static routing is relatively easy to configure for large networks. Refer to the exhibit. Which is the best way for PC A and PC B to successfully communicate with sites on the Internet? Configure a static route from R1 to ISP and a dynamic route from ISP to R1. Configure a default route from R1 to ISP and a static route from ISP to R1. Configure a dynamic route from R1 to ISP and a static route from ISP to R1. Configure a routing protocol between R1 and ISP and advertise all the routes. What type of route allows a router to forward packets even though its routing table contains no specific route to the destination network?


About Us

CCNA v5 Answers, CCNA v5 Blog, CCNA 5 Blog, CCNA Blog

Articles

Our Contacts