CCNA 1 v6.0

CCNA1 v6.0 Practice Final Exam Answers 2017 (100%) | CCNA5.NET

1. Which term refers to a network that provides secure access to the corporate offices by suppliers, customers and collaborators? Internet intranet extranet* extendednet 2. A small business user is looking for an ISP connection that provides high speed digital transmission over regular phone lines. What ISP connection type should be used? DSL* dial-up satellite cell modem cable modem 3. Refer to the exhibit. An administrator is trying to configure the switch but receives the error message that is displayed in the exhibit. What is the problem? The entire command, configure terminal, must be used. The administrator is already in global configuration mode. The administrator must first enter privileged EXEC mode before issuing the command.* The administrator must connect via the console port to access global configuration mode. 4. Which keys act as a hot key combination that is used to interrupt an IOS process? Ctrl-Shift-X Ctrl-Shift-6* Ctrl-Z Ctrl-C 5. Refer

CCNA 1 v6.0 Final Exam Answers Option A 100%

CCNA 1 v6.0 Final A PDF Take Assessment CCNA 1 v6.0 Final Exam Answers 2018 (100%) Introduction to Networks (Option A) 1 What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service delivered to existing users a network that supports a mechanism for managing congestion and ensuring reliable delivery of content to all users a network that recovers quickly when a failure occurs and depends on redundancy to limit the impact of a failure* 2 Three bank employees are using the corporate network. The first employee uses a web browser to view a company web page in order to read some announcements. The second employee accesses the corporate database to perform some financial transactions. The third employee participates in an important live audio conference with other corporate managers in branch offices.

CCNA 1 v6.0 Final Exam Answers Option B 100%

CCNA 1 v6.0 Final B PDF Take Assessment CCNA 1 v6.0 Final Exam Answers 2018 (100%) Introduction to Networks (Option B) 1 A company is expanding its business to other countries. All branch offices must remain connected to corporate headquarters at all times. Which network technology is required to support this requirement? LAN MAN WAN* WLAN 2 A home user is looking for an ISP connection that provides high speed digital transmission over regular phone lines. What ISP connection type should be used? DSL* dial-up satellite cell modem cable modem 3 How does quality of service help a network support a wide range of applications and services? by limiting the impact of a network failure by allowing quick recovery from network failures by providing mechanisms to manage congested network traffic* by providing the ability for the network to grow to accommodate new users 4 On which switch interface would an administrator configure an IP address so that the switch can be managed remotely?

CCNA 1 v6.0 Final Exam Answers Option C 100% | CCNA5.NET

  • 29/03/2018 18:47
  • /
  • 95

Introduction to Networks 1 A medium-sized business is researching available options for connecting to the Internet. The company is looking for a high speed option with dedicated, symmetric access. Which connection type should the company choose? DSLdialupsatelliteleased line* cable modem 2 What is the purpose of having a converged network? to provide high speed connectivity to all end devicesto make sure that all types of data packets will be treated equallyto achieve fault tolerance and high availability of data network infrastructure devicesto reduce the cost of deploying and maintaining the communication infrastructure* 3 What characteristic of a network enables it to quickly grow to support new users and applications without impacting the performance of the service being delivered to existing users? reliabilityscalability* quality of serviceaccessibility 4 Which connection provides a secure CLI session with encryption to a Cisco switch? a console connectionan

CCNA3 v6.0 Chapter 2 Exam Answers 100%

CCNA3 Scaling Networks v6.0 Chapter 2 Exam Answers 100% 1. What is a characteristic of VTP? Switches in VTP client mode store VLAN information in NVRAM. Switches in VTP transparent mode forward VTP advertisements.* Switches in VTP server mode cannot be updated by switches in VTP client mode. Switches in VTP transparent mode revert back to VTP server mode after a reboot. 2. Which two VTP parameters must be identical on all switches in the network in order to participate in the same VTP domain? (Choose two.) VTP domain name* VTP revision number VTP domain password* VTP server mode VTP client mode VTP transparent mode 3. Which two events will cause the VTP revision number on a VTP server to change? (Choose two.) adding VLANs* rebooting the switch changing the VTP domain name* changing the switch to a VTP client changing interface VLAN designations 4. Given the following configuration, which two statements are true? (Choose two.) switch(vlan)# vtp version 2 switch(vlan)# vtp mode server

CCNA 1 v6.0 ITN Practice Skills Assessment – Packet Tracer Option A | CCNA5.NET

  • 29/03/2018 16:45
  • /
  • 66

CCNA 1 v6.0 Introduction to Networks ITN Practice Skills Assessment – Packet Tracer Option A Download .PKZA few things to keep in mind while completing this activity:1. Do not use the browser Back button or close or reload any exam windows during the exam.2. Do not close Packet Tracer when you are done. It will close automatically.3. Click the Submit Assessment button in the browser window to submit your work. Introduction In this assessment, you will configure devices in an IPv4/IPv6 network. For the sake of time, you will not be asked to perform all configurations on all network devices as you may be required to do in a real network or other assessment. Instead, you will use the skills and knowledge that you have learned in the labs in this course to configure the Town Hall router . In addition, you will address the hosts on two LANs with IPv4 and IPv6 addresses, activate and address the management interface of the Administration Switch , and back up a device

Packet Tracer CCNA 1 v6.0 Chapter 6 PT Practice Skills Assessment Type 1 | CCNA5.NET

  • 29/03/2018 15:44
  • /
  • 64

Chapter 6 Skill Exam Type 1 You will receive one of three possible topologies Addressing Table Device Interface Address Subnet Mask Default Gateway Housing G0/0 172.16.5.1 255.255.255.0 N/A G0/1 192.168.5.1 255.255.255.0 N/A Bldg1 VLAN 1 172.16.5.2 255.255.255.0 172.16.5.1 Bldg2 VLAN 1 192.168.5.252 255.255.255.0 192.168.5.1 RA1-1 NIC 172.16.5.10 255.255.255.0 172.16.5.1 RA1-2 NIC 172.16.5.11 255.255.255.0 172.16.5.1 RA2-1 NIC 192.168.5.10 255.255.255.0 192.168.5.1 RA2-2 NIC 192.168.5.11 255.255.255.0 192.168.5.1 Housing Router Configuration Router>enable Router#configure terminal Router(config)#hostname Housing Housing(config)#enable secret cisco Housing(config)#line console 0 Housing(config-line)#password cisco Housing(config-line)#login Housing(config-line)#exit Housing(config)#line vty 0 4 Housing(config-line)#password cisco Housing(config-line)#login Housing(config-line)#exit

Packet Tracer CCNA 1 v6.0 Chapter 6 PT Practice Skills Assessment Type 2 | CCNA5.NET

  • 29/03/2018 14:42
  • /
  • 68

Chapter 6 Skill Exam 2018 You will receive one of three possible topologies Addressing Table Device Interface Address Subnet Mask Default Gateway Science G0/0 172.16.5.1 255.255.255.0 N/A G0/1 192.168.5.1 255.255.255.0 N/A Bio VLAN 1 172.16.5.2 255.255.255.0 172.16.5.1 Phys VLAN 1 192.168.5.252 255.255.255.0 192.168.5.1 Bio 1 NIC 172.16.5.10 255.255.255.0 172.16.5.1 Bio 2 NIC 172.16.5.11 255.255.255.0 172.16.5.1 Phys 1 NIC 192.168.5.10 255.255.255.0 192.168.5.1 Phys 2 NIC 192.168.5.11 255.255.255.0 192.168.5.1 Science Router Configuration Router>enable Router#configure terminal Router(config)#hostname Science Science(config)#enable secret cisco Science(config)#line console 0 Science(config-line)#password cisco Science(config-line)#login Science(config-line)#exit Science(config)#line vty 0 4 Science(config-line)#password cisco Science(config-line)#login Science(config-line)#exit

Packet Tracer CCNA 1 v6.0 Chapter 6 PT Practice Skills Assessment Type 3 | CCNA5.NET

  • 29/03/2018 13:40
  • /
  • 48

Chapter 6 Skill PT 2018 You will receive one of three possible topologies Addressing Table Device Interface Address Subnet Mask Default Gateway College G0/0 172.16.5.1 255.255.255.0 N/A G0/1 192.168.5.1 255.255.255.0 N/A Faculty VLAN 1 172.16.5.2 255.255.255.0 172.16.5.1 Admin VLAN 1 192.168.5.252 255.255.255.0 192.168.5.1 Prof X NIC 172.16.5.10 255.255.255.0 172.16.5.1 Prof Y NIC 172.16.5.11 255.255.255.0 172.16.5.1 Dean X NIC 192.168.5.10 255.255.255.0 192.168.5.1 Dean Y NIC 192.168.5.11 255.255.255.0 192.168.5.1 Objectives • Perform basic device configuration tasks on a router and a switch• Configure IP addressing settings on network devices• Venfy Layer 3 connectivity and troubleshoot connectivity issues Scenario You are working on a network that has already been partially configured In this assessment you will complete a set of requirements by configunng some additional settings on the Faculty switch and the router. Use the knowledge that you have gained

CCNA 1 v6.0 ITN Practice Skills Assessment – Packet Tracer Option B | CCNA5.NET

  • 29/03/2018 12:39
  • /
  • 67

CCNA 1 v6.0 Introduction to Networks ITN Practice Skills Assessment – Packet Tracer Option B A few things to keep in mind while completing this activity:1. Do not use the browser Back button or close or reload any exam windows during the exam.2. Do not close Packet Tracer when you are done. It will close automatically.3. Click the Submit Assessment button in the browser window to submit your work. Introduction In this assessment, you will configure devices in an IPv4/IPv6 network. For the sake of time, you will not be asked to perform all configurations on all network devices as you may be required to do in a real network or other assessment. Instead, you will use the skills and knowledge that you have learned in the labs in this course to configure the Building 1 router. In addition, you will address the hosts on two LANs with IPv4 and IPv6 addresses, activate and address the management interface of the Second Floor Switch, and back up a device configuration to

CCNA 1 v6.0 ITN Practice Skills Assessment – Packet Tracer Option B | CCNA5.NET

CCNA 1 v6.0 Introduction to Networks ITN Practice Skills Assessment – Packet Tracer Option B A few things to keep in mind while completing this activity:1. Do not use the browser Back button or close or reload any exam windows during the exam.2. Do not close Packet Tracer when you are done. It will close automatically.3. Click the Submit Assessment button in the browser window to submit your work. Introduction In this assessment, you will configure devices in an IPv4/IPv6 network. For the sake of time, you will not be asked to perform all configurations on all network devices as you may be required to do in a real network or other assessment. Instead, you will use the skills and knowledge that you have learned in the labs in this course to configure the Building 1 router. In addition, you will address the hosts on two LANs with IPv4 and IPv6 addresses, activate and address the management interface of the Second Floor Switch, and back up a device configuration to

Packet Tracer CCNA 1 v6.0 Chapter 6 PT Practice Skills Assessment Type 2 | CCNA5.NET

Chapter 6 Skill Exam 2018 You will receive one of three possible topologies Addressing Table Device Interface Address Subnet Mask Default Gateway Science G0/0 172.16.5.1 255.255.255.0 N/A G0/1 192.168.5.1 255.255.255.0 N/A Bio VLAN 1 172.16.5.2 255.255.255.0 172.16.5.1 Phys VLAN 1 192.168.5.252 255.255.255.0 192.168.5.1 Bio 1 NIC 172.16.5.10 255.255.255.0 172.16.5.1 Bio 2 NIC 172.16.5.11 255.255.255.0 172.16.5.1 Phys 1 NIC 192.168.5.10 255.255.255.0 192.168.5.1 Phys 2 NIC 192.168.5.11 255.255.255.0 192.168.5.1 Science Router Configuration Router>enable Router#configure terminal Router(config)#hostname Science Science(config)#enable secret cisco Science(config)#line console 0 Science(config-line)#password cisco Science(config-line)#login Science(config-line)#exit Science(config)#line vty 0 4 Science(config-line)#password cisco Science(config-line)#login Science(config-line)#exit

Packet Tracer CCNA 1 v6.0 Chapter 6 PT Practice Skills Assessment Type 3 | CCNA5.NET

  • 20/01/2018 06:59
  • /
  • 92

Chapter 6 Skill PT 2018 You will receive one of three possible topologies Addressing Table Device Interface Address Subnet Mask Default Gateway College G0/0 172.16.5.1 255.255.255.0 N/A G0/1 192.168.5.1 255.255.255.0 N/A Faculty VLAN 1 172.16.5.2 255.255.255.0 172.16.5.1 Admin VLAN 1 192.168.5.252 255.255.255.0 192.168.5.1 Prof X NIC 172.16.5.10 255.255.255.0 172.16.5.1 Prof Y NIC 172.16.5.11 255.255.255.0 172.16.5.1 Dean X NIC 192.168.5.10 255.255.255.0 192.168.5.1 Dean Y NIC 192.168.5.11 255.255.255.0 192.168.5.1 Objectives • Perform basic device configuration tasks on a router and a switch• Configure IP addressing settings on network devices• Venfy Layer 3 connectivity and troubleshoot connectivity issues Scenario You are working on a network that has already been partially configured In this assessment you will complete a set of requirements by configunng some additional settings on the Faculty switch and the router. Use the knowledge that you have gained

Packet Tracer CCNA 1 v6.0 Chapter 6 PT Practice Skills Assessment Type 1 | CCNA5.NET

Chapter 6 Skill Exam Type 1 You will receive one of three possible topologies Addressing Table Device Interface Address Subnet Mask Default Gateway Housing G0/0 172.16.5.1 255.255.255.0 N/A G0/1 192.168.5.1 255.255.255.0 N/A Bldg1 VLAN 1 172.16.5.2 255.255.255.0 172.16.5.1 Bldg2 VLAN 1 192.168.5.252 255.255.255.0 192.168.5.1 RA1-1 NIC 172.16.5.10 255.255.255.0 172.16.5.1 RA1-2 NIC 172.16.5.11 255.255.255.0 172.16.5.1 RA2-1 NIC 192.168.5.10 255.255.255.0 192.168.5.1 RA2-2 NIC 192.168.5.11 255.255.255.0 192.168.5.1 Housing Router Configuration Router>enable Router#configure terminal Router(config)#hostname Housing Housing(config)#enable secret cisco Housing(config)#line console 0 Housing(config-line)#password cisco Housing(config-line)#login Housing(config-line)#exit Housing(config)#line vty 0 4 Housing(config-line)#password cisco Housing(config-line)#login Housing(config-line)#exit

CCNA 1 v6.0 ITN Practice Skills Assessment – Packet Tracer Option A | CCNA5.NET

CCNA 1 v6.0 Introduction to Networks ITN Practice Skills Assessment – Packet Tracer Option A Download .PKZA few things to keep in mind while completing this activity:1. Do not use the browser Back button or close or reload any exam windows during the exam.2. Do not close Packet Tracer when you are done. It will close automatically.3. Click the Submit Assessment button in the browser window to submit your work. Introduction In this assessment, you will configure devices in an IPv4/IPv6 network. For the sake of time, you will not be asked to perform all configurations on all network devices as you may be required to do in a real network or other assessment. Instead, you will use the skills and knowledge that you have learned in the labs in this course to configure the Town Hall router . In addition, you will address the hosts on two LANs with IPv4 and IPv6 addresses, activate and address the management interface of the Administration Switch , and back up a device

CCNA1 v6.0 Chapter 7 Exam Answers 2017 (100%)

1. How many bits are in an IPv4 address? 32* 64 128 256   2. Which two parts are components of an IPv4 address? (Choose two.) subnet portion network portion* logical portion host portion* physical portion broadcast portion   3. What does the IP address 172.17.4.250/24 represent? network address multicast address host address* broadcast address   4. What is the purpose of the subnet mask in conjunction with an IP address? to uniquely identify a host on a network to identify whether the address is public or private to determine the subnet to which the host belongs* to mask the IP address to outsiders   5. What subnet mask is represented by the slash notation /20? 255.255.255.248 255.255.224.0 255.255.240.0* 255.255.255.0 255.255.255.192   6. A message…Read More...

CCNA1 v6.0 Chapter 8 Exam Answers 2017 (100%)

1. What is a result of connecting two or more switches together? The number of broadcast domains is increased. The size of the broadcast domain is increased.* The number of collision domains is reduced. The size of the collision domain is increased. 2. Refer to the exhibit. How many broadcast domains are there? 1 2 3 4* 3. What are two reasons a network administrator might want to create subnets? (Choose two.) simplifies network design improves network performance* easier to implement security policies* reduction in number of routers needed reduction in number of switches needed 4. Refer to the exhibit. A company uses the address block of 128.107.0.0/16 for its network. What subnet mask would provide the maximum number of equal size subnets while providing enough host addresses for each subnet in the exhibit? 255.255.255.0 255.255.255.128* 255.255.255.192 255.255.255.224 255.255.255.240 5. Refer to the exhibit. The network administrator has assigned the

CCNA1 v6.0 Chapter 9 Exam Answers 2017 (100%)

1. Which two characteristics are associated with UDP sessions? (Choose two.) Destination devices receive traffic with minimal delay.* Transmitted data segments are tracked. Destination devices reassemble messages and pass them to an application. Received data is unacknowledged.* Unacknowledged data packets are retransmitted.   2. What happens if part of an FTP message is not delivered to the destination? The message is lost because FTP does not use a reliable delivery method. The FTP source host sends a query to the destination host. The part of the FTP message that was lost is re-sent.* The entire FTP message is re-sent.   3. A host device needs to send a large video file across the network while providing data communication to other users. Which feature will allow…Read More...

CCNA1 v6.0 Chapter 10 Exam Answers 2017 (100%)

1. Which two definitions accurately describe the associated application layer protocol? (Choose two.) SMTP – transfers web pages from web servers to clients Telnet – provides remote access to servers and networking devices* DNS – resolves Internet names to IP addresses* FTP – transfers email messages and attachments HTTP – enables devices on a network to obtain IP addresses 2. The application layer of the TCP/IP model performs the functions of what three layers of the OSI model? (Choose three.) physical session* network presentation* data link transport application* 3. Which layer in the TCP/IP model is used for formatting, compressing, and encrypting data? internetwork session presentation application* network access 4. What are two characteristics of the application layer of the TCP/IP model? (Choose two.) responsibility for logical addressing responsibility for physical addressing the creation and maintenance of dialogue between source and destination

CCNA1 v6.0 Chapter 11 Exam Answers 2017 (100%)

1. A newly hired network technician is given the task of ordering new hardware for a small business with a large growth forecast. Which primary factor should the technician be concerned with when choosing the new devices? devices with a fixed number and type of interfaces devices that have support for network monitoring redundant devices devices with support for modularity*   2. Which network design consideration would be more important to a large corporation than to a small business? Internet router firewall low port density switch redundancy*   3. Which two traffic types require delay sensitive delivery? (Choose two.) email web FTP voice* video*   4. A network administrator for a small company is contemplating how to scale the network over the next three years…Read More...


About Us

CCNA v5 Answers, CCNA v5 Blog, CCNA 5 Blog, CCNA Blog

Articles

Our Contacts